THREAD STUCK IN DEVICE DRIVER error in Windows 10 [FIXED]

This is the most common error message on Windows 10 and you should be able to fix it.
The thread in device driver stopped responding
This can occur for any number of reasons, but if your PC has ever been infected with a trojan or virus then this could indicate that something was corrupting the file system from within.

The “thread stuck in device driver amd fix” is a problem that happens when your devices drivers are not installed properly. You can fix this issue by installing the correct drivers for your device.

Milan Stanojevic is a writer who lives in Belgrade, Serbia.

Expert in Windows and Software

Milan has been fascinated by computers since he was a youngster, and this has led him to be interested in all PC-related technology. He worked as a front-end web developer before joining WindowsReport. Continue reading

2nd of December, 2021

Publish date: April 2020

  • Stop errors, often known as blue screen errors, indicate that Windows is experiencing a major issue.
  • Are you getting the error THREAD STUCK IN DEVICE DRIVER? Act quickly, since a BSoD crash is almost always the outcome.
  • It is not impossible to resolve this problem. All you have to do now is update your drivers, run the BSoD Troubleshooter, or attempt any of the other simple remedies.
  • This isn’t the only issue you could be having with your PC. If you’re searching for more helpful tutorials like this one, go over to our comprehensive Windows 10 problems hub.

THREAD-STUCK-IN-DEVICE-DRIVER-error-in-Windows-10-FIXED

Update your PC’s drivers to keep it healthy. This program will aid in the detection of outdated and malfunctioning drivers, as well as the automated search for a suitable replacement. As a result, you’ll be using all of your system’s components at maximum capacity. In three simple steps, you can check your drivers:

  1. Now you can get DriverFix for free (secured download)
  2. Start the application and choose the Scan option.
  3. Wait for the scan to complete before beginning to install the required drivers.
  • This month, 0 readers have successfully downloaded DriverFix.

Because Blue Screen of Death mistakes are caused by software or malfunctioning hardware, they may be highly dangerous. Despite the fact that these mistakes aren’t very prevalent, it’s crucial to understand how to correct them.

As a result, we’ll teach you how to resolve the THREAD STUCK IN DEVICE DRIVER M problem on Windows 10 today.

How can I get rid of the error THREAD STUCK IN DEVICE DRIVER?

Start by using the BSoD Troubleshooter. 

Let’s try a few troubleshooting tools if none of the previous methods worked. The built-in BSoD troubleshooter in Windows 10 will be our first port of call.

As you may expect, this tool can help with a wide range of BSoD issues. Hopefully, one of these is the THREAD STUCK IN DEVICE DRIVER M problem.

Here’s how to use the built-in BSOD troubleshooter in Windows 10:

  1. Go to the Update & Security section of the Settings app.
  2. From the left-hand menu, choose Troubleshoot.
  3. From the right pane, choose BSOD and then click Run the Troubleshooter.PFN-LIST-CORRUPT-Blue-Screen-error-in-Windows-10-FIXED
  4. To finish the troubleshooter, follow the directions on the screen.

2. Keep your drivers up to date.

Because outdated or defective drivers may cause Blue Screen of Death issues, it’s critical to update your drivers in order to solve THREAD STUCK IN DEVICE DRIVER M and other BSoD errors.

Because Windows 10 extensively depends on drivers to communicate with your hardware, it’s critical that your drivers be current and compatible with Windows 10.

You may use Device Manager to update your drivers by following these steps:

  1. To enter the Power User Menu, press Windows Key + X on your keyboard and pick Device Manager from the list. 1638447411_616_THREAD-STUCK-IN-DEVICE-DRIVER-error-in-Windows-10-FIXED
  2. Locate the driver you wish to update in Device Manager, right-click it, and choose Update Driver Software. 1638447412_44_THREAD-STUCK-IN-DEVICE-DRIVER-error-in-Windows-10-FIXED
  3. Wait for Windows 10 to download the proper driver after selecting Search automatically for updated driver software. 1638447413_681_THREAD-STUCK-IN-DEVICE-DRIVER-error-in-Windows-10-FIXED
  4. Rep these procedures for each driver that has to be updated.

It’s quite straightforward to update drivers using Device Manager, but you should be aware that it doesn’t always get the most recent drivers for your device.

We highly recommended that you manually download your drivers to guarantee that you have the most up-to-date versions.

To manually update drivers, go to your hardware manufacturer’s website and download the most recent drivers for your device. Keep in mind that in order to repair this problem, you may need to update all of your drivers.

Drivers are updated automatically.

It might take a long time to look for drivers on your own. As a result, we recommend that you utilize a program that will do this task for you automatically.

Using an automated driver updater will save you the time and effort of manually looking for drivers, and it will ensure that your system is always up to date with the newest drivers.

As a result, you should install the most recent versions of your drivers using a reputable driver program like DriverFix.

3. Perform an SFC scan.

The SFC scan is the next troubleshooting tool we’ll attempt here. This is a command-line utility that searches for and restores faulty files on your computer.

If you’re receiving the THREAD STUCK IN DEVICE DRIVER M because of a faulty system file, the SFC scan will most likely fix the issue.

To conduct the SFC scan in Windows 10, follow these steps:

  1. Open Command Prompt by right-clicking on the Start Menu button (Admin).
  2. Enter the command sfc/scannow and click Enter.1617308479_916_PAGE-NOT-ZERO-error-in-Windows-10-Full-Guide
  3. Wait till the procedure is completed (it may take a while).
  4. If a solution is identified, it will be implemented automatically.
  5. Restart your computer after closing the Command Prompt.

4. Execute DISM

DISM is another troubleshooting solution we’ll attempt here. The utility DISM (Deployment Image Servicing and Management) re-deploys the system image.

This may frequently solve a variety of issues, including BSOD failures. We’ll guide you through both the normal and the installation media method below:

  1. Open Command Prompt by right-clicking Start (Admin).
  2. Press Enter after pasting the following command:
    • DISM /Online /Cleanup-Image /RestoreHealth DISM /Online /Cleanup-Image /RestoreHealth1617308480_583_PAGE-NOT-ZERO-error-in-Windows-10-Full-Guide
  3. Wait for the scan to complete.
  4. Restart your computer and try again with the update.
  • With the installation media for Windows
  1. Place your Windows installation discs in the drive.
  2. Right-click the Start menu and choose Command Prompt from the menu (Admin).
  3. Type the following commands in the command line, pressing Enter after each one:
    • scanhealth /dism /online /cleanup-image
    • /cleanup-image /restorehealth /dism /online
  4. Now type and hit Enter the following command:
    • DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess DISM /Online /Cleanup-Image /RestoreHealth
  5. When installing Windows 10, be careful to replace an X value with the letter of the mounted disk.
  6. Restart your computer after the operation is completed.

5. Perform a hard drive check.

Expert Tip: Some PC problems, such as damaged repositories or missing Windows files, are difficult to resolve. If you’re having problems repairing a mistake, it’s possible that your system is partly broken. Restoro is a tool that will scan your computer and determine the source of the problem. To download and begin mending, go here.

It’s scary to have a hard disk that’s broken. The initial warning signs are in the form of BSOD errors. So, go ahead and examine your hard drive’s present status. You should use the chkdsk command to do this.

This command will examine your partitions and, if feasible, apply remedies. In Windows 10, follow these steps to perform the chkdsk command:

  1. Go to the Advanced Startup page (Restart your computer while holding the Shift key).
  2. Select Troubleshoot > Advanced Options from the drop-down menu.
  3. Choose Command Prompt from the drop-down menu.
  4. To launch it, open Command Prompt and type the following lines, pressing Enter after each line:
    • /rebuildbcd bootrec.exe1617308482_16_PAGE-NOT-ZERO-error-in-Windows-10-Full-Guide
    • /fixmbr bootrec.exe
    • /fixboot bootrec.exe
  5. Some people have suggested that you execute extra chkdsk commands as well. You’ll need to know the drive letters for all of your hard disk partitions to run these commands. You should type the following in Command Prompt (remember to use the letters that correspond to your PC’s hard disk partitions):
    • /r c: chkdsk1617308483_935_PAGE-NOT-ZERO-error-in-Windows-10-Full-Guide
    • chkdsk /r d chkdsk /r d chkdsk /r

    This is only an example; remember that you must run the chkdsk command for each hard disk partition you have.

  6. Check to see whether the problem has been fixed by restarting your computer.

Install the most recent updates.

Certain hardware and applications are incompatible with Windows 10, and this might result in THREAD STUCK IN DEVICE DRIVER M or other Blue Screen of Death errors.

It is advised that you utilize Windows Update to obtain the most recent updates to resolve this issue.

Many of these patches include new features, security enhancements, and bug fixes for both hardware and software, therefore we highly advise you to download the most recent updates if you want to keep your PC secure and error-free.

7. Uninstall your antivirus software as well as any other potentially harmful programs.

Despite the fact that Windows 10 has Windows Defender as the default antivirus application, many users choose to utilize third-party antivirus software for further security.

To resolve this issue, you need temporarily disable all third-party antivirus software on your computer.

We should point out that just uninstalling the antivirus software may not be sufficient, since many antivirus programs tend to leave some files behind even after they have been removed.

We recommend using a specialist removal program to thoroughly remove all files connected with your antivirus.

The majority of antivirus vendors have these programs accessible on their websites, so be sure to download one for your antivirus. You may also have a look at this fantastic roundup of the finest uninstaller software available right now.

8. Make a BIOS update.

A few individuals say that updating the BIOS would cure the problem. By upgrading your BIOS, you’ll have access to new features and hardware support for your motherboard.

We must caution you that updating your BIOS is a pretty complicated operation, and if you’re not cautious, you might permanently harm your computer.

We recommend consulting your motherboard handbook for complete details on how to correctly update BIOS.

9. Disable overclocking.

Overclocking is a technique for improving performance by altering the settings of your hardware. Overclocking is potentially risky, as it may result in BSoD problems like THREAD STUCK IN DEVICE DRIVER.

Overclocking, in the worst-case situation, might permanently destroy your hardware, so bear that in mind.

Because overclocking might result in Blue Screen of Death issues, we recommend that you uninstall any overclocking settings and applications you may have installed.

10. Examine your hardware.

Because BSoD faults are often caused by hardware difficulties and overheating, we recommend that you clean your PC with compressed air. Check that your cards are correctly seated and that your connections are properly linked as well.

Remove any newly installed devices if everything is connected correctly. When new hardware isn’t compatible with your setup, you should remove it or replace it.

In addition to purchasing new hardware, make sure that your existing gear is in good working order. According to users, this problem might be caused by a defective motherboard or graphics card, so be sure to check those components first.

This error may create a variety of issues on your computer, but we hope you were able to resolve it using one of our remedies.

1635156952_270_How-to-stop-Amazon-Assistant-from-popping-up-Fixed Are you still experiencing problems? Use this tool to fix them:

  1. Download this TrustPilot.com-rated PC Repair Tool (download starts on this page).
  2. To detect Windows faults that may be causing PC difficulties, click Start Scan.
  3. To repair faults with Patented Technologies, click Repair All (Exclusive Discount for our readers).

This month, 0 readers have downloaded Restoro.

Most Commonly Asked Questions

Was this page of assistance to you?

Thank you very much!

There are insufficient details It’s difficult to comprehend Other Speak with a Professional

Start a discussion.

Watch This Video-

The “thread stuck in device driver windows 10 dell” is an error that has been present for a while. A fix has been released by Dell to fix the issue.

Frequently Asked Questions

How do I fix driver errors in Windows 10?

A: You can find out what driver is causing the errors by accessing Device Manager. In order to do this, follow these steps: Press Windows Key + R and type in devmgmt.msc
This will open up a new window, with all devices that you have connected to your computer displayed on it. Look for an error message near one of the listed drivers and then select Properties from the pop-up menu next to it

How do I fix driver status error?

A: The driver status error is most likely caused by a faulty PS4 controller. Try restarting the game and try again if you still have the issue after that.

How do I fix my Amdkmdag system?

A: This is a very common issue, and there are many causes. It could be due to bad RAM or hard drive, it can also be caused by an incompatible system configuration (incompatible graphics card), as well as other errors that cannot be fixed with this quick fix. For more information on what the problem might actually be you should search for Possible Causes of Amdkmdag Error

  • how to fix thread stuck in device driver
  • stop code thread stuck in device driver windows 10
  • thread stuck in device driver amd reddit
  • thread stuck in device driver ryzen 3200g
  • thread stuck in device driver premiere pro
Total
0
Shares
Share 0
Tweet 0
Pin it 0